Hand Wash / Personal care-14

Fore and Aft is eco-friendly water soluble Biodegradable cleaner. Due to its Non-caustic base formula makes a product easy to handle by personnel and non-hazardous on the metal surface and its all ingredients are Non-flammable enhancing the property of fore-aft to make storage hassle free.

Due to Non-Hazardous nature of cleaner giving opportunity to use in the food storage areas; Suitable for cleaning of sanitary fixtures i.e. showers, toilets etc; Can be used on windows and portholes.

Marine Chemicals suitable for Shipping industries and used as a biodegradable cleaner which is the mixture of surfactants mixture with alkaline materials, suitable for cleaning accommodation and galley areas.

Marine ship cleaning chemicals for maintenance fore aft cleaner for accommodation and galley areas of the ship.

HANDLING & STORAGE

Handling: Avoid contact with skin and eyes. Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Keep away from all ignition sources.

Storage: Store in cool, well- ventilated place away from sources of heat and direct sunlight. Keep container tightly closed. Keep only in the original container.

HEALTH & SAFETY:
Product is unlikely to present any significant health or safety hazards when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

Petroleum jelly is a mixture of mineral oils and waxes, which form a semisolid jelly-like substance.  Petroleum jelly also called petrolatum, white petrolatum, soft paraffin, or multi-hydrocarbon.

Petroleum Jelly CAS number is 8009-03-8

Petroleum Jelly Manufacturer, Exporter and supplier in Kolkata Howrah, Mumbai Navi Mumbai MIDC, Gandhidham Gujrat GIDC, Chennai Ennore, Visakhapatnam, Fujairah UAE Middle East, Dubai, Sharjah, Abudhabi, Ajman, Diera, Muscat Barak, Sohar, Oman

White translucent soft mass, Unctuous to touch, Odorless and tasteless not more than slightly fluorescent by daylight when melted.
PERFORMANCE STANDARDS
Jelly resists change in its structure without sweating under normal Operating
Essentially Meets IP/BP/USP Standard

This product is used in Industries like,  Cosmetics
Drugs & Pharmaceuticals
Food Processing and Handling

It exhibits very good lubricity properties, moisture loss resistance to lotions, creams, ointments etc.

and is used as a vehicle in ointments & other formulations in pharmaceutical / cosmetic industry.

Our Petroleum Jellies are stable to light & oxidation and keeps good structure during processing.

This product is treated for harmful polycyclic aromatic impurities and it passes the Polycyclic

Aromatic Hydrocarbon test along with other purity norms in the Pharmacopoeia and complies to all the Regulatory requirements as per the European commission.

APPLICATION : Boilers, calorifiers, heat exchanges, diesel engine cooling system, condensers, evaporators & other type of equipment where rust & scale form. 

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.

Handling & Storage

Safety

•    No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.

•    Keep in a tightly closed container. Protect from physical damage.

•    Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.

•    Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

•    Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.

The self-indicating grade that changes colours to indicate that the efficiency of material has been finished.
Colourless Solution showing Powerful Strength.
Light Brown-Yellow Solution indication Poor strength, In this stage addition of more powder required to dissolve the scale.
Blue colour solution will result in neutralization of Acidic Power, After completion of Descaling process system must be neutralized with ALKALI SOLUTION. When we'll put alkali solution into the used descaler - solution, Acidic power will get neutralized and BLUE colour will develop.

Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection

This is mixed with fresh water 3 to 20 percent depending on deposition of scaling. After using RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025 at least 2-4 house, up to neutrial of PH valve.
 

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-37-8865-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. This should not be done more than twice. RXSOL-37-8865-025  should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descale Powder.If salt is not available, an acceptable alternative is to dissolve RXSOL-37-8865-025  in  water. After use of RXSOL-37-8865-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descale Powder RXSOL-37-8865-025. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descale Powder a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.

After using  RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
 

Why Use RXSOL Descaler?

• It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
• You do not have to heat RXSOL-37-8865-025 .
  RXSOL-37-8865-025  is safer for the employees to use than other acid products.
• Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
•  Cleans down to the original surface without pitting.
•  RXSOL-37-8865-025 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
•  RXSOL-37-8865-025  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
•  Removing the scale build up allows your equipment to operate more efficiently with less down time.

Descaling Chemical manufacturers, Descaling Chemical suppliers, Descaling Chemical producers, Descaling Chemical exporters

RXSOL-37-8865-025 Descaler Descalant Powder with Colour Indicator manufacturer and supplier in Kakinada, Visakhapatnam, Andhra pradesh, Mumbai, Navi Mumbai MIDC, Panvel, Taloja, Pune, Nashik, Gandhidham, Kandla - GIDC, Mundra, Jamnagara, Sikka, Surat Hazira, Chennai Ennore, Kolkata, Howrah, Paradip,Sohar, Barka Muscat Oman, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Diera, UAE Middle East, Varanashi, Patna, Ranchi, Tata, Munger, Nairobi Kenya Africa, Canada

#SulfamicACID_AlexandriaEgypt

Condensate Corrosion Inhibitor CI 8050 manufacturer and supplier in UAE Middle East, Oman, Sharjah, Ajman, Abudhabi, Dubai, Fujairah, Muscat Sohar Barka Oman, Sudan, Yemen, Mumbai, Kolkata, Chennai, Gandhidham, Surat, Ahmedabad, Visakhapatnam, Haldia, Paradip, Ennore, Navi Mumbai

TYPICAL PROPERTIES