Skip to main content
Email :rxmarinechemical@gmail.com
Contact: 91 08069976670,
91 08069976671 , 91 08069976672

ANTI SCALANT for WASTE WATER

Book a FREE call with our Technical Expert

   

Stock Point

Fully equipped factories at strategic locations:

Mumbai

Gandhidham

Kolkata

Vizag

Chennai

Dubai – UAE

Muscat – OMAN

 

Related Post

ANTI SCALANT for WASTE WATER

SKU:
SKU
RXSOL-40-9103-220
Product Category:
Short Description
Short Description
ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION PHOSPHONATE-BASED
Other Equivalent Brand Products
Also known as

ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION PHOSPHONATE-BASED

Product Description

Scale Inhibitor Antiscalant is specially designed to inhibit the scale formation ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION 

It  is a stabilized solution of organic phosphonates and polyacrylates with high dispersing effect. Scale Inhibitor Antiscalant is an excellent inhibitor for calcium sulphate and calcium carbonate. A further advantage is the excellent stabilizing effect for barium and strontium sulphate. In addition even iron may be stabilized. The contained copolymers act also as a dispersing agent for organic contaminants and metal oxides.

Application

Scale Inhibitor Antiscalant  is highly efficient scale inhibitor for Scale Inhibitor Antiscalant is specially designed to inhibit the scale formation ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION 

Dose

The dosage is controlled proportionally by Standard metering pumps are used. Fitting materials are PE, PP or coated steel. In order to avoid biological fouling, the containers have to be cleaned from time to time with a 10 % sodium bisulfite solution or a sodium hydroxide water solution solution at pH=13.

Scale Inhibitor Antiscalant can be diluted with water in any ratio. However, it is recommended to inject the antiscalant undiluted or as solution up to 10 %. The diluted solutions have to be consumed within 48 hours after preparation. The required dosage level depends on the operating conditions and water composition and varies in the range of 1 – 10 ppm as delivered.

Technical Specifications

 

Appearance : Clear, dark yellow liquid
Density : 1.14 – 1.16 g/cm3
Viscosity : Approx. 50 mPa.s
pH-value : 4.8 – 5.3
Boiling Point : 105° C
Freezing Point : -10° C
Solubility in water : unlimited
Supply Location
Locations

ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION PHOSPHONATE-BASED manufacturer and supplier in Yemen, Sudan, Nairobi, Muscat Sohar, Oman, Fujairah, Dubai, Sharjah, Abudhabi, UAE Middle East, Mumbai, Kandla Surat Gandhidham Gujrat, Chennai Ennore, Visakhaptnam, Kolkata West Bengal, Varanashi, Tata, Patna, Canada

Product Category

Copyright © 2021 Powered By RXMARINE - All Rights Reserved