Engine Water Treatment

 Engine Water Treatment

RXSOL-40-4010-025

Engine Water Treatment contains a balanced mixture of corrosion inhibitors in liquid form, together with an antiscalant. It is formulated to protect systems containing aluminium components.

  Features 
 

• Protects all metals (including aluminium) in engine cooling systems from corrosion attack
   
• Does not affect gaskets or hoses
   
• Compatible with antifreeze solutions
   

Benefits

              Active Matter: 75-80

               Packaging: 25.00 Ltr.

       Application:

• RXSOL Liquid EWT is very useful for Maintaining Nitrate In MIE,A/E & Compressor Fresh Water Cooling System.
• RXSOL Liquid EWT treatment is an effective corrosion inhibitor for ferrous metals in marine circulating cooling water systems.
• Because certain aluminum alloys are highly anodize, they may be difficult to completely protect.
• Therefore, the use of RXSOL liquid EWT treatment with systems containing aluminum alloys should be discussed with a local Rx Marine Marine representative prior to starting treatment.
• In order to ensure the maximum benefits from a RXSOL Liquid EWT treatment program, the system should be inspected for deposits and corrosion.
• If the system is found to be contaminated, it must be chemically cleaned before the treatment program begins.

      Dose:
 

• The system should be filled with good quality fresh or distilled water and where freeze protection is necessary, the proper amount of glycol-based antifreeze should be added. Begin circulating the system water, and add RXSOL Liquid EWT cooling water treatment at an initial dosage of 8 liters per ton of system water capacity. Circulate for 30 minutes after addition to ensure good distribution and the establishment of a protective film.

 Tech  Spec

       Video Clips
 

• Concrete Sealer
• Cement Remover   
• Rigwash    
• Drain Pipe Cleaner 
• Aluminium Cleaner
• Floor Cleaner
• AirCooler Cleaner        
• Rust Remover
• HighTuff Foam
• Carpet Shampoo
• Electrosol
• Paint Remover