Product Application

The Importance of RXSOL-16-1501-020 by High-Pressure Cleaning The job of high pressure cleaning can be done easier & quicker by simply using RXSOL-16-1501-020 in correct dosa -ges. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1 : Spraying the RXSOL-16-1501-020 over the area to be cleaned.
Step 2 : Washing down the area using a high-pressure water jet After the RXSOL-16-1501-020 has been sprayed on the surface and before

The wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the RXSOL-12-1501-210 thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of RXSOL-16-1501-020 substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL-16-1501-020 in correct dosages is half the job done. 3 Pieces of Good Advice Apply RXSOL-12-1501-210 on dry surface where possible!A dry surface will absorb far better than a wet surface.When applying RXSOL-16-1501-020 on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL-12-1501-210 may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning:It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL-16-1501-020 will  give  the  best  effect.