Skip to main content
Email :rxmarinechemical@gmail.com
Contact: 91 08069976670,
91 08069976671 , 91 08069976672

OxyTreat 3100

Why Choose RX Marine International

Experience

30+ Years of Excellence

Proven industry leadership and chemical innovation since 1990.

Global Reach

Global Reach

Servicing clients in 35+ countries with reliable logistics.

Formulation

Advanced Formulation

High-performance chemicals built on cutting-edge R&D.

Fast Delivery

Fast Delivery

Ready stock and express fulfillment across regions.

Book a FREE call with our Technical Expert

 
 

Stock Points

Fully equipped factories at strategic locations:

Mumbai

Gandhidham

Kolkata

Vizag

Chennai

Dubai – UAE

Muscat – OMAN

 

Related Post

OxyTreat 3100

SKU:
SKU
RXSOL-40-5025-025
Product Category:
Variations
Short Description
Short Description
It is a catalysed oxygen scavenger in powder form.
Other Equivalent Brand Products
Also known as

Maxtreat 3100, OxyTreat 3100 Powder 25 Kg

Product Description

OXYGEN SCAVENGER

RXSOL-40-5025-025  is a catalysed oxygen scavenger in powder form. It is a blend of sodium sulphite and a catalyst. It is recommended for the rapid and complete removal of dissolved oxygen from boiler feed water. RXSOL-40-5025-025 reacts with oxygen to produce sodium sulphate, which contributes to the dissolved solids in boiler feed water. (Na2SO3 + ½ O2 = Na2SO4).

Application

RXSOL-40-5025-025 solution should be dosed continuously. Dissolve the required quantity of RXSOL-40-5025-025 gently in boiler feed water in a separate tank. Dose this solution continuously in the boiler feed water line after the deaerator.

Above 8 ppm of sodium sulphite is required for the removal of 1 ppm of dissolved oxygen from boiler feed water. About 10% to 20% of excess sulphite should be dosed to provide oxygen consuming reserve.

The table below gives the approximate dosage.

Feed Water Temperature RXSOL-40-5025-025 dosage in gms per ton ofsteam generation

More than 80oC
15
60 to 80oC 30
40 to 60oC 60
Less than 40oC 100

The RX MARINE will provide technical assistance in arriving at optimum dosages for your operating conditions and requirements and in selecting a suitable dosing system for your plant

Note
Note

TEST METHOD ::: http://rxmarine.com/hydrazine-test-kit

Technical Specifications

RAPID REACTION :

The catalyst RXSOL-40-5025-025 speeds up the removal of dissolved oxygen. Oxygen can be removed completely even from cold water due to catalytic action. Normal reaction time is as low as 15 to 20 seconds as against 10 to 30 minutes for uncatalysed sulphite.

EASY TO HANDLE :

RXSOL-40-5025-025 is a free flowing powder. It is soluble in water even at lower feed water temperature.It is non-toxic and non-corrosive and, therefore, can be handled easily.

pH CONTROL :

RXSOL-40-5025-025 is formulated to get proper pH control for optimum availability of catalyst for rapid oxygen removal.

COST EFFECTIVE :

The catalytic action reduces the excessive requirement of sulphite in feed water for the rapid removal of oxygen. Thus, the quantity required is lower, making RXSOL-40-5025-025 treatment cost effective.

Product Remark
Remarks

HANDLING, STORAGE AND PRECAUTIONS :

RXSOL-40-5025-025 is mildly alkaline in nature. Normal precautions should be taken while handling solid powders. In case of contact, wash with water. Do not swallow.

RXSOL-40-5025-025 should be stored in a dry condition. Close the container tightly to avoid contact with air.

PACKING :

RXSOL-40-5025-025 is available in 25 kg polythene lined bags.

Related Information
Note

TEST METHOD ::: http://rxmarine.com/hydrazine-test-kit

Supply Location
Locations

OxyTreat 3100 - Oxygen Scavenger Catalyzed powder manufacturer and supplier in India, Oman, Middle East, Canada, Africa. RXSOL OXYGEN Scavenger Catalyzed powder supplier in Kenya, Uganada, Africa, Sharjah, Dubai, Ajman, Fujairah, Abudhabi, UAE, Mumbai, Gandhidham, Chennai Ennore, Haldia Kolkata, Visakhapatnam, Asia, Canada

Product Categories

 
 

Copyright © 2021 Powered By RXMARINE - All Rights Reserved