Acenaphthene For Synthesis MSDS

Product Name RXSOL-60-6502-001
Product Type ACENAPHTHENE FOR SYNTHESIS 
Revised date 27-04-2019

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

3.1. Substance: ACENAPHTHENE FOR SYNTHESIS
CAS No : 83- 32- 9
Substance.
Contains no other components or impurities which will influence the classification of the
product.

2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Skin corrosion/irritation, H315
Category 2
Serious eye damage/eye H319
irritation, Category 2
Specific target organ
toxicity — Single
exposure, Category 3,
Respiratory tract irritation H335
Hazardous to the aquatic
environment — Chronic H410
Hazard, Category 1
Full text of classification categories and H statements : see section 16
Classification according to Directive 67/548/EEC or 1999/45/EC
N; R51/53
Full text of R-phrases: see section 16
Adverse physicochemical, human health and environmental effects
No additional information available
2.2. Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to
displayExtra classification(s) to display
Symbol(s) : N : Dangerous for the environment
R Phrase(s):R51/53 : Toxic to aquatic organisms, may cause long-term adverse effects
in the aquatic environment.
S Phrase(s) :S61: avoid release to the environment . refer to special instruction/safety
data sheets.
Hazard pictograms
Signal word: Warning
Hazard statements: H315 - Causes skin irritation
H319 - Causes serious eye irritation
H335 - May cause respiratory irritation
H410 - Very toxic to aquatic life with long lasting effects
Precautionary statements: P261 - Avoid breathing vapours, dust, fume, gas
P273 - Avoid release to the environment
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing
P501 - Dispose of contents/container to an approved waste disposal plant
2.3. Other hazards
No additional information available

4.1. Description of first aid measures
First-aid measures after inhalation : Assure fresh air breathing. If breathing is difficult,
remove victim to fresh air and keep at rest in a position comfortable for breathing.
First-aid measures after skin contact : Wash with plenty of soap and water. Get
immediate medical advice/attention.
First-aid measures after eye contact : Rinse immediately with plenty of water. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth out with water.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries after inhalation : May cause respiratory irritation.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
 

5.1. Extinguishing media
Suitable extinguishing media : Carbon dioxide. Dry powder. Foam. Water spray.
Unsuitable extinguishing media : Do not use extinguishing media containing water.
5.2. Special hazards arising from the substance or mixture
No additional information available
5.3. Advice for firefighters
Protection during firefighting : Do not enter fire area without proper protective

equipment, including respiratory protection.

6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Use personal protective equipment as required.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up : On land, sweep or shovel into suitable containers. Soak up
spills with inert solids, such as clay or diatomaceous earth as soon as possible.
6.4. Reference to other sections
No additional information available

7.1.Precautions for safe handling :
Avoid dust formation. Avoid contact with skin and eyes.
Do not breathe vapours.
Hygiene measures : Wash hands and other exposed areas with mild soap and water before
eating, drinking or smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions : Store in a well-ventilated place. Keep container tightly closed.
7.3. Specific end use(s)
No additional information available

8.1. Control parameters
No additional information available
8.2. Exposure controls
Hand protection : Protective gloves
Eye protection : Chemical goggles or safety glasses
Skin and body protection : Wear suitable protective clothing
Respiratory protection : Wear appropriate mask

9.1. Information on basic physical and chemical properties
Odour threshold : No data available
pH : No data available
Relative evaporation rate (butylacetate=1) : No data available
Melting point : 90 - 94 °C
Freezing point : No data available
Boiling point : 279 °C
Flash point : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Flammability (solid, gas) : No data available
Vapour pressure : No data available
Relative vapour density at 20 °C : No data available
Relative density : No data available
Density : 1.02 g/cm³
Solubility : Water: Insoluble in water
Log Pow : 3.39 - 4.19
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive properties : No data available
Oxidising properties : No data available
Explosive limits : No data available
9.2. Other information
No additional information available

10.1. Reactivity
No additional information available
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No additional information available
10.4. Conditions to avoid

Direct sunlight. Moisture. Water, humidity

11.1. Information on toxicological effects
Acute toxicity : Not classified
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitisation : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified
Reproductive toxicity : Not classified
Specific target organ toxicity (single exposure) : May cause respiratory irritation.
Specific target organ toxicity (repeated exposure) : Not classified
Aspiration hazard : Not classified

12.1. Toxicity
No additional information available
12.2. Persistence and degradability
No additional information available
12.3. Bioaccumulative potential
Acenaphthene (83-32-9)
Log Pow 3.39 - 4.19
12.4. Mobility in soil
No additional information available
12.5. Results of PBT and vPvB assessment
No additional information available
12.6. Other adverse effects
No additional information available

13.1. Waste treatment methods

No additional information available

14.1. UN number
UN-No. (ADR) : 3077
UN-No. (IMDG) : 3077
UN-No.(IATA) : 3077
UN-No.(ADN) : 3077
UN-No. (RID) : 3077
14.2. UN proper shipping name
Proper Shipping Name (ADR) : ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
SOLID, N.O.S.
Proper Shipping Name (IMDG) : ENVIRONMENTALLY HAZARDOUS
SUBSTANCE, SOLID, N.O.S.
Proper Shipping Name (IATA) : ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
SOLID, N.O.S.

15.1. Safety, health and environmental regulations/legislation specific for the
substance or mixture
15.1.1. EU-Regulations
No REACH Annex XVII restrictions
Acenaphthene is not on the REACH Candidate List
Acenaphthene is not on the REACH Annex XIV List
15.2. Chemical safety assessment
No additional information available

Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : mail@rxmarine.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarine@gmail.com ( This mail is for supplier only )