Acenaphthene for Synthesis Laboratory Chemical MSDS

 

Product Name	RXSOL-60-6502-001
Product Type	ACENAPHTHENE FOR SYNTHESIS
Revised date	27-04-2019

Company Details:

RX MARINE INTERNATIONAL 105, A wing , BSEL , TECH PARK. VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka

Phone	+91 22 27815541 / 42
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	mail@rxmarine.com

3.1. Substance: ACENAPHTHENE FOR SYNTHESIS CAS No : 83- 32- 9 Substance. Contains no other components or impurities which will influence the classification of the product.

2.1. Classification of the substance or mixture Classification according to Regulation (EC) No. 1272/2008 [CLP] Skin corrosion/irritation, H315 Category 2 Serious eye damage/eye H319 irritation, Category 2 Specific target organ toxicity — Single exposure, Category 3, Respiratory tract irritation H335 Hazardous to the aquatic environment — Chronic H410 Hazard, Category 1 Full text of classification categories and H statements : see section 16 Classification according to Directive 67/548/EEC or 1999/45/EC N; R51/53 Full text of R-phrases: see section 16 Adverse physicochemical, human health and environmental effects No additional information available 2.2. Label elements Labelling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayExtra classification(s) to display Symbol(s) : N : Dangerous for the environment R Phrase(s):R51/53 : Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. S Phrase(s) :S61: avoid release to the environment . refer to special instruction/safety data sheets. Hazard pictograms Signal word: Warning Hazard statements: H315 - Causes skin irritation H319 - Causes serious eye irritation H335 - May cause respiratory irritation H410 - Very toxic to aquatic life with long lasting effects Precautionary statements: P261 - Avoid breathing vapours, dust, fume, gas P273 - Avoid release to the environment P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P501 - Dispose of contents/container to an approved waste disposal plant 2.3. Other hazards No additional information available

4.1. Description of first aid measures First-aid measures after inhalation : Assure fresh air breathing. If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. First-aid measures after skin contact : Wash with plenty of soap and water. Get immediate medical advice/attention. First-aid measures after eye contact : Rinse immediately with plenty of water. Get medical advice/attention. First-aid measures after ingestion : Rinse mouth out with water. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries after inhalation : May cause respiratory irritation. Symptoms/injuries after skin contact : Causes skin irritation. Symptoms/injuries after eye contact : Causes serious eye irritation. 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically. 5.1. Extinguishing media Suitable extinguishing media : Carbon dioxide. Dry powder. Foam. Water spray. Unsuitable extinguishing media : Do not use extinguishing media containing water. 5.2. Special hazards arising from the substance or mixture No additional information available 5.3. Advice for firefighters Protection during firefighting : Do not enter fire area without proper protective

equipment, including respiratory protection.

6.1. Personal precautions, protective equipment and emergency procedures 6.1.1. For non-emergency personnel Emergency procedures : Evacuate unnecessary personnel. 6.1.2. For emergency responders Protective equipment : Use personal protective equipment as required. Emergency procedures : Ventilate area. 6.2. Environmental precautions Avoid release to the environment. 6.3. Methods and material for containment and cleaning up Methods for cleaning up : On land, sweep or shovel into suitable containers. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. 6.4. Reference to other sections No additional information available

7.1.Precautions for safe handling : Avoid dust formation. Avoid contact with skin and eyes. Do not breathe vapours. Hygiene measures : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. 7.2. Conditions for safe storage, including any incompatibilities Storage conditions : Store in a well-ventilated place. Keep container tightly closed. 7.3. Specific end use(s) No additional information available

8.1. Control parameters No additional information available 8.2. Exposure controls Hand protection : Protective gloves Eye protection : Chemical goggles or safety glasses Skin and body protection : Wear suitable protective clothing Respiratory protection : Wear appropriate mask

9.1. Information on basic physical and chemical properties Odour threshold : No data available pH : No data available Relative evaporation rate (butylacetate=1) : No data available Melting point : 90 - 94 °C Freezing point : No data available Boiling point : 279 °C Flash point : No data available Auto-ignition temperature : No data available Decomposition temperature : No data available Flammability (solid, gas) : No data available Vapour pressure : No data available Relative vapour density at 20 °C : No data available Relative density : No data available Density : 1.02 g/cm³ Solubility : Water: Insoluble in water Log Pow : 3.39 - 4.19 Viscosity, kinematic : No data available Viscosity, dynamic : No data available Explosive properties : No data available Oxidising properties : No data available Explosive limits : No data available 9.2. Other information No additional information available

10.1. Reactivity No additional information available 10.2. Chemical stability Stable under normal conditions. 10.3. Possibility of hazardous reactions No additional information available 10.4. Conditions to avoid

Direct sunlight. Moisture. Water, humidity

11.1. Information on toxicological effects Acute toxicity : Not classified Skin corrosion/irritation : Causes skin irritation. Serious eye damage/irritation : Causes serious eye irritation. Respiratory or skin sensitisation : Not classified Germ cell mutagenicity : Not classified Carcinogenicity : Not classified Reproductive toxicity : Not classified Specific target organ toxicity (single exposure) : May cause respiratory irritation. Specific target organ toxicity (repeated exposure) : Not classified Aspiration hazard : Not classified

 

12.1. Toxicity No additional information available 12.2. Persistence and degradability No additional information available 12.3. Bioaccumulative potential Acenaphthene (83-32-9) Log Pow 3.39 - 4.19 12.4. Mobility in soil No additional information available 12.5. Results of PBT and vPvB assessment No additional information available 12.6. Other adverse effects No additional information available

13.1. Waste treatment methods

No additional information available

14.1. UN number UN-No. (ADR) : 3077 UN-No. (IMDG) : 3077 UN-No.(IATA) : 3077 UN-No.(ADN) : 3077 UN-No. (RID) : 3077 14.2. UN proper shipping name Proper Shipping Name (ADR) : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. Proper Shipping Name (IMDG) : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. Proper Shipping Name (IATA) : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture 15.1.1. EU-Regulations No REACH Annex XVII restrictions Acenaphthene is not on the REACH Candidate List Acenaphthene is not on the REACH Annex XIV List 15.2. Chemical safety assessment No additional information available

Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic. vPvB: very persistent and very bioaccumulative Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006    

RX MARINE INTERNATIONAL is the supplier of  ACENAPHTHENE FOR SYNTHESIS  in Mumbai, Gandhidham, Kolkata,

Visakhapatnam, Chennai & Fujairah, Oman & Muscat.

For any queries contact us: mail@rxmarine.com   Product:  ACENAPHTHENE FOR SYNTHESIS ACACIA Confirms to IP