Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Descalant Powder with Colour Indicator

Product Description | Product Application | Product Notes| Product DOSE
Powdered Descalant - Safe Acid Descaler mixture and Cleaner with colour pH indicator with Acid Inhibitor. RXSOL Powder Scale mixture effectively dissolves Calcium and Mineral scale depsoits.  it is s [+] Read More...
Code:
RXSOL-37-8865-025
Other Equivalent Brand

Hydrex 5201, Accepta 2316, Sulfamic Acid Descaler Cleaner with colour indicator Inhibitor, Sulfamic Descaler with colour indicator Inhibitor, Descalant Inhibitor with Colour pH Indicator

Short Description:
Powdered Inhibited Acid Descaler Cleaner with colour indicator Inhibitor can be used for removing scales obtained from water in heating and cooling systems e.g. boilers, condensers, heat exchangers, jackets and coils
Generic Name:
Descaling powder with colour indicator
Active Matter:
95-96
IMPA Code:
550970, 550971
Descalant Powder with Colour Indicator
Application:
Fast and effctive scale remover. It is a superior heavy duty POWDER containing accelerators, corrosion inhibitors & wetting agents with scale dissolver. Specifically formulated to remove rust and wat [+] Read More...
Using Procedure:
DIRECTION OF USAGE •    Machines should be rinsed with water to remove loose flakes & sludge's before use •    Powder should be added to warm water for an ideal solution •    The sample should be prope [+] Read More...
Note:
Powdered Inhibited Acid Descaler with Colour pH Indicator Packing  Inhibited Powder Acid is available in H.D.P.E. bags of net 25 and 50 Kgs. Material. Sample packets of 100-200 gms. are supplied on requ [+] Read More...
Technical Specifications:

 

APPLICATION : Boilers, calorifiers, heat exchanges, diesel engine cooling system, condensers, evaporators & other type of equipment where rust & scale form. 

Appearance

Reddish / Yellowish / white – Powder ( without indicator )  
Density         1.2g/cm3
pH                 (10 wt %):1.1

 

Compatibility
Metal    Suitable aluminium, zinc, tin and their alloys. Stainless steel, Carbon Steel, Cast Iron, Titanium, Copper , Copper alloys, PVC, Plastic , Rubber  Rubber No known effect
Rubber No known effect
Remarks:

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.

Handling & Storage

Safety

•    No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.

•    Keep in a tightly closed container. Protect from physical damage.

•    Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.

•    Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

•    Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.

The self-indicating grade that changes colours to indicate that the efficiency of material has been finished.
Colourless Solution showing Powerful Strength.
Light Brown-Yellow Solution indication Poor strength, In this stage addition of more powder required to dissolve the scale.
Blue colour solution will result in neutralization of Acidic Power, After completion of Descaling process system must be neutralized with ALKALI SOLUTION. When we'll put alkali solution into the used descaler - solution, Acidic power will get neutralized and BLUE colour will develop.

Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection

This is mixed with fresh water 3 to 20 percent depending on deposition of scaling. After using RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025 at least 2-4 house, up to neutrial of PH valve.
 

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-37-8865-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. This should not be done more than twice. RXSOL-37-8865-025  should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descale Powder.If salt is not available, an acceptable alternative is to dissolve RXSOL-37-8865-025  in  water. After use of RXSOL-37-8865-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descale Powder RXSOL-37-8865-025. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descale Powder a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.

After using  RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
 

Why Use RXSOL Descaler?

  • It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
  • You do not have to heat RXSOL-37-8865-025 .
    RXSOL-37-8865-025  is safer for the employees to use than other acid products.
  • Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
  •  Cleans down to the original surface without pitting.
  •  RXSOL-37-8865-025 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
  •  RXSOL-37-8865-025  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
  •  Removing the scale build up allows your equipment to operate more efficiently with less down time.

Descaling Chemical manufacturers, Descaling Chemical suppliers, Descaling Chemical producers, Descaling Chemical exporters

RXSOL-37-8865-025 Descaler Descalant Powder with Colour Indicator manufacturer and supplier in Kakinada, Visakhapatnam, Andhra pradesh, Mumbai, Navi Mumbai MIDC, Panvel, Taloja, Pune, Nashik, Gandhidham, Kandla - GIDC, Mundra, Jamnagara, Sikka, Surat Hazira, Chennai Ennore, Kolkata, Howrah, Paradip,Sohar, Barka Muscat Oman, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Diera, UAE Middle East, Varanashi, Patna, Ranchi, Tata, Munger, Nairobi Kenya Africa, Canada

#SulfamicACID_AlexandriaEgypt

Descalant Powder with Colour Indicator
:
Packing Size:
25.00 Ltr.
Available Packing Size:
Descalant powder Inhibitor with Colour Indicator available in 500 Grm / 1 / 5 / 10 / 20 / 35 / 50 Kg packing
Article News:
,

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : mail@rxmarine.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarine@gmail.com ( This mail is for supplier only )