Activated carbon manufacturer, supplier and exporter. We are manufacturing Granular Activated Carbon with various Iodine Adsorption value (mg. /gm.): 450 IV - 1200 IV
We manufacture and export Activated Carbon to our clients that are formulated using premium quality chemicals and according to the international quality standards. These are used for the reduction of the impurities related to taste, odour and colour inorganic chemicals. Our ranges of products are fully tested by quality analysts to ensure that the defect free range is supplied to our customers. We offer these at cost effective prices.
An activated carbon product can be characterized by its activity and physical properties. Activity properties include pore size distribution that defines the available pore volume of a carbon over three pore size regions: the micropore, mesopore, and macropore regions:
Micropore region - less than 100 Angstroms
Mesopore region - between 100 and 1,000 Angstroms
Macropore region - greater than 1,000 Angstroms
Pore size distribution properties are key indicators of a carbon's potential performance for removing contaminants (adsorbates) from water. The molecules encountered in the gas phase are generally smaller than those in the liquid phase applications; therefore, a gas phase carbon has the majority of its pores concentrated in the micropore region.
A broad range of pore sizes must be available, both for ease of movement of adsorbates through the carbon pores and for the adsorption of particular molecular sizes. Liquid phase carbons often contain a broader pore size distribution to remove color bodies and larger organic materials, while maintaining some microporosity for the removal of taste and odor compounds.
Physical properties include surface area, product density, mesh size, abrasion resistance, and ash content.
Typical measured carbon properties include:
Iodine Number - standard testing done to estimate the surface area of the activated carbon by measuring iodine adsorption at a given set of standard testing conditions, reported in mg I2 adsorbed per gram carbon
Surface Area - amount of surface available for adsorption for a given mass of carbon, measured using techniques such as BET nitrogen adsorption; reported in units of m2/g
Product Density - several properties available, including apparent density which is the density of the carbon at maximum packing efficiency, reported in g/cc or lbs/cf
Mesh Size - measure of particle range of the granular product, usually reported as a range of sieve openings, such as 12 x 40 for a carbon that passes a 12 mesh screen, but is retained on a 40 mesh screen with a specification on the amount that can be retained on the larger opening screen or passing the smaller opening screen; basis is US sieve sizes Abrasion Number - measure of the ability of the carbon product to resist attrition; this important property permits one to understand how durable the activated carbon is in applications where backwashing is required, carbon will be transferred, or treatment velocities are above average
Ash Level - a measure of the non-carbon content of the activated carbon; all base materials have a certain ash constituency, with the content varying from base material to base material; for example, coconut shell carbon tends to have more alkali earth metals, while coal-based carbons have more heavy metals
|
GRADE |
RX AW-200 |
RX AW - 250 |
RX AW - 300 |
RX AW - 350 |
RX AW - 400 |
RX AW - 450 |
|
MB VALUE mg/gm |
200 (±10) |
250 (±10) |
300 (± 10) |
350 (± 10) |
400 (± 10) |
450 (± 10) |
|
pH OF 1% WATER EXTRACT |
6 to 7 |
6 to 7 |
6 to 7 |
6 to 7 |
6 to 7 |
6 to 7 |
|
ASH % MAX |
4 |
4 |
4 |
4 |
4 |
4 |
|
SOLUBLE ASH % MAX |
1 |
1 |
1 |
1 |
1 |
1 |
|
IRON ppm MAX |
250 |
200 |
200 |
200 |
200 |
200 |
|
MOISTURE % MAX |
5 to 10 |
5 to 10 |
5 to 10 |
5 to 10 |
5 to 10 |
5 to 10 |
|
ACID SOLUBLE % MAX |
2 |
2 |
2 |
2 |
2 |
2 |
|
WATER SOLUBLE % |
1 |
1 |
1 |
1 |
1 |
1 |
|
L.O.D % MAX |
7 to 10 |
7 to 10 |
7 to 10 |
7 to 10 |
5 to 10 |
5 to 10 |
|
CHLORIDES ppm |
USP |
USP |
USP |
USP |
USP |
USP |
|
% KMnO4 ADSORPTION |
55 |
65 |
75 |
85 |
90 |
95 |
|
IODINE VALUE mg/gm |
800 (± 50) |
850 (± 50) |
1000(± 50) |
1100(±50) |
1150 |
1200 |
|
METHANOL TEST |
No Turbidity |
No Turbidity |
Passes |
Passes |
Passes |
Passes |
|
PARTICLE SIZE |
85 % Passing through 250 mesh size |
85 % Passing through 250 mesh size |
85 % Passing through 250 mesh size |
85 % Passing through 250 mesh size |
85 % Passing through 250 mesh size |
85 % Passing through 250 mesh size |
Natural gas liquids and field condensate purification: To meet NGL’s pipeline specs, gas processors use our PETRODARCO® MS to remove heavier hydrocarbons, resins, and asphaltenes. This high-performance activated carbon also removes H2S, mercaptans and other sulfur bodies providing increased value.
checkmark
HPNA removal in hydrocracking units: Higher polynuclear aromatics (HPNAs) occur as a result of hydrocracking, and they cause coke formation, deactivation of catalysts, equipment fouling and reduced product yields. NORIT® activated carbon products (NORIT GAC 830 and GAC 830W) adsorb and eliminate HPNAs. These NORIT GAC products are coal-based carbons with a flat internal surface which is ideally fit to adsorb the large, flat HPNA molecules.
checkmark
Hydrocarbon purification for lubricant oils ingredients, waxes, etc.: NORIT activated carbons (granular and powdered) are also used to purify specialized refinery products by removing polycyclic aromatics or color bodies.
