ACETIC ACID FOR HPLC MSDS
| Product Name | RXSOL-60-6505-001 |
| Product Type | ACETIC ACID FOR HPLC |
| Revised date | 27-04-2019 |
Company Details:
RX MARINE INTERNATIONAL 105, A wing , BSEL , TECH PARK. VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Classification : R10 C; R35
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Health hazards : Acute toxicity, Inhalation - Category 4 - Warning (CLP : Acute Tox. 4)
H332 Skin corrosion - Category 1A - Danger (CLP : Skin Corr. 1A) H314
Serious eye damage - Category 1 - Danger (CLP : Eye Dam. 1) H318
Physical hazards : Flammable liquids - Category 3 - Warning (CLP : Flam. Liq. 3) H226
3.2. Label elements
Labelling EC 67/548 or EC 1999/45
Symbol(s) : C : Corrosive
R Phrase(s) : R10 : Flammable.
R35 : Causes severe burns.
S Phrase(s) : S1/2 : Keep locked up and out of reach of children.
S23 : Do not breathe the gas, fumes, vapours, spray.
S26 : In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice.
S45 : In case of accident or if you feel unwell, seek medical advice immediately ( show
the label when possible).
Labelling Regulation EC 1272/2008 (CLP)
Hazard pictograms
4.1. Description of first aid measures
Inhalation : Immediately call a POISON CENTER or doctor. Remove to fresh air and
keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor if
you feel unwell.
Skin contact : Wash with plenty of soap and water. Remove/Take off immediately all
contaminated clothing. Immediately call a POISON CENTER or doctor.
Eye contact : Immediately call a POISON CENTER or doctor. Remove contact lenses, if
present and easy to do. Continue rinsing. Rinse cautiously with water for several minutes.
Ingestion : Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT
induce vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Danger of serious damage to health by prolonged exposure
through inhalation.
Causes severe skin burns and eye damage.
Causes serious eye damage.
4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person. If you
feel unwell, seek medical advice (show the label where possible).
|
|
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection.
Ventilate area.
Technical measures : Use special care to avoid static electric charges.
Special precautions : Remove ignition sources. No naked lights. No smoking.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters. Notify
authorities if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods : Soak up spills with inert solids, such as clay or diatomaceous earth
as soon as possible. Collect spillage. Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling : Handle empty containers with care because residual vapours are flammable.
Wash thoroughly after handling. Avoid contact during pregnancy or while nursing. Do
not breathe dust, fume, gas, mist, vapours, spray. Take precautionary measures against
static discharge. Use only outdoors or in a well-ventilated area.
Technical protective measures : Provide good ventilation in process area to prevent
formation of vapour. Proper grounding procedures to avoid static electricity should be
followed. Use only non-sparking tools. Use explosion-proof electrical, ventilating,
lighting, …,equipment.
Special precautions : No naked lights. No smoking.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place. Keep in
fireproof place. Keep container tightly closed. Ground/bond container and receiving
equipment.
Storage regulation : Comply with applicable regulations.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
Heat sources.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Liquid.
Odour : Strong, vinegar-like
Odour threshold : No data available.
pH value : No data available.
Melting point [°C] : 16.2 °C
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : 485 °C
Flammability (solid, gas) : N/A
Flammable liquid and vapour.
Flash point [°C] : 40°C
Boiling point [°C] : 117 - 118 °C
Initial boiling point [°C] : 117°C
Final boiling point [°C] : 118°C
Evaporation rate : 0,97
Vapour pressure [20°C] : 15.2 hPa at 20°C
Vapour pressure mm/Hg : N/A
Vapour density : 2,1
Density [g/cm3] : 1,049
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : Complete
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : 2,4
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : 19,90%
Explosion limits - lower [%] : 4%
Oxidising properties : No data available.
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures. Open flame.
Overheating. Heat. Sparks.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide.
Thermal decomposition generates : Corrosive vapours. May release flammable gases.
11.1. Information on toxicological effects
Acute toxicity
• Inhalation : Harmful if inhaled.
• Dermal : Based on available data, the classification criteria are not met.
• Ingestion : Based on available data, the classification criteria are not met.
Corrosion : Causes severe skin burns and eye damage.
Causes serious eye damage.
Irritation : Based on available data, the classification criteria are not met.
Sensitization : Based on available data, the classification criteria are not met.
Mutagenicity : Based on available data, the classification criteria are not met.
Carcinogenicity : Based on available data, the classification criteria are not met.
Toxic for reproduction : Based on available data, the classification criteria are not met.
STOT-single exposure : Based on available data, the classification criteria are not met.
STOT-repeated exposure : Based on available data, the classification criteria are not
met.
Aspiration hazard : Based on available data, the classification criteria are not met.
15.1. Safety, health and environmental regulations/legislation specific for the
substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to
restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject
to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Product:
ACETIC ACID FOR HPLC
TAGS