RXSOL Teepol is Anionic in nature, which is resulting very good emulsification with most of oily and greasy contents. TEEPOL RXSOL multiple cleaning formula increasing its application field widely. TEEPOL RXSOL not only used in Household, industrial cleaning application but also commonly used in Laboratory, Pharamceutical, MARINE cleaning operation. 

We are supplying teepol rxsol widely in INDIA - Middle East and Oman. And we are supplier of RXSOL TEEPOL in Navi Mumbai MIDC, Mumbai, Gandhidham, Mundra, Sikka Jamnagar, Surat, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Dubai, Abudhabi, Ajman, Sharjah Muscat Sohar Oman... http://rxmarine.com/Teepol-RXSOL-Supplier

MSDS of RXSOL TEEPOL and Price : mail@rxmarine.com

Also refer this link : http://rxmarine.com/Marinechemical-supplier

There are many advantages of using Demuslfier manufactured by RX Marine International. We have been in this market for more than 25 years and have developed a modern, cost effective, efficient and remarkable result showing porduct.

Some of the advantages of using RXSOL Demulsifier are:

• Contains surface-active materials
• Separates water from oil
• Free from defilements
• Excellent stability
• Precise chemical composition
• Easy to Handle

Difference between Cement Retarder and Cement Accelerator

Retarding admixtures : Generally used in HOT Weather.
Chemicals : Sodium Gluconate, Gypsum,sugar,strach etc

Retarding admixtures helps and work as water reducing agent and Cemenrt retarder keep concrete workable during placement and delay the initial set of concrete. Chemically retarder slow the setting rate of concrete, are used to counteract the accelerating effect of hot weather on concrete setting. High temperatures often cause an increased rate of hardening which makes placing and finishing difficult. Retarders keep concrete workable during placement and delay the initial set of concrete. Most retarders also function as water reducers and may entrain some air in concrete. Retarder use for increase setting time of cement.

Accelerating admixtures : Generally used in COLD Weather.
Chemicals : Refined silicates, Aluminium sulfate and synthetic plasticizer, calcium chloride etc.

Accelerators make concrete set faster rapidly after mixing with concrete. This product can be added to a concrete batch either immediately before or during mixing to kick the set time of a batch of concrete into high gear and initiate setting time one to three times faster than normal mortar and concrete. On the other hand Accelerating admixtures increase the rate of early strength development, reduce the time required for proper curing and protection, and speed up the start of finishing operations.  Chloride Free and Accelerating Compund for Concrete and Mortar. Accelerator is use for reduce setting time.

Accelerating admixtures are especially useful for modifying the properties of concrete in cold weather.

Uses of Potassium permagnate for water treatment ?

Potassium permanganate is disinfectant ( control biological growth ) and control odor and taste, remove manganese, iron and color from the water. And potassium permagnate effectively removing sulfide odors from water.

NOTE : Give sufficient time to to complete reaction of potassium permagnate with polluted water, You may need a detention tank to give adequate time for iron and manganese to oxidize. If you are treating taste and odor, use doses of potassium permanganate ranging from 0.25 to 20mg per liter.

After treatment with potassium permagnate Filter drinking water to remove the manganese dioxide as well as the elemental sulfur precipitate that resulted from the treatment with the potassium permanganate. Potassium permanganate treatment is commonly filter with resin bed system. It’s best to have your filter professionally installed.

How Carbon Filters Work ?

Importance of CARBON increases due to its large surface area. Mathematical area calculation of one pound carbon can cover more then 120 acres of ground surface. And simple concept is MORE surface area can absorb large quanities of impurities present in water and other liquid materials. 

In water carbon filtration case  impurities present in water which can cause disease like cancer and other health problem. Carbon filters due to its large surface area absorbs easily large amount of chemicals and substances that pose serious dangers to the normal domestic water supply. work so well because of their large surface area.
Carbon granuals water  filtering is a method to remove contaminants and impurities, removing chlorine, sediment, volatile organic compounds (VOCs), taste and odor from water.

Largest Exporter of carbon from Mumbai, Gujrat - INDIA.

Activated Carbon used in the field of Edible Oil, Dyes, Fertilizer,Pharmaceutical, Oil Refineries etc.   We are exporter of activated carbon globally to countries like UK ,USA, Canada, UAE,  Brazil, Chile, Dubai,  Argentina  Australia Austria  Bahrain Bangladesh  Belgium  Brazil   Czech Republic Denmark Finland France Germany  Iran Iraq Ireland Japan  South Korea  Kuwait  Mexico  Netherlands New Zealand Norway Panama Portugal Qatar  Russia Saudi  Singapore  South Africa  Spain  Sweden Switzerland Turkey   Yemen  Zimbabwe etc.

In India and UAE we have Sales Representatives in the following cities -

Ennore - Chennai ,  Surat , Vishakapatnam (Vizag), Navi Mumbai , Kolkata , Kandla Gandhidham - INDIA

Fujairha - UAE

MOHR'S METHOD

Principle

Chlorides are estimated as sodium chloride by titration against silver nitrate using potassium chromate as indicator. Silver nitrate is added until all the chloride ions present in the SAMPLE WATER have combined with the silver ions. Any further silver nitrate added is now free to combine with the potassium chromate indicator to yield a red precipitate of silver chromate. The solution at this point suddenly changes from pale yellow to faint brick-red colour.

NaCl + AgNO3→AgCl + NaNO3

Reagents

1.

Standard silver nitrate solution (2.906 g of silver nitrate is dissolved in and made up to 1 litre with distilled water). Keep in an amber bottle and standardize against an accurately prepared sodium chloride solution containing 500 mg NaCl per 100 ml using the method described below. Check at frequent intervals, and determine the factor.

1 ml standard AgNO3 equal to 1 mg NaCl

2. 5 per cent potassium chromate solution.

Procedure : 

1. Pipette 1.0 ml SAMPLE WATER into a conical flask containing about 10 ml of distilled water and 2–3 drops of potassium chromate.

2. Slowly add the silver nitrate from a 10 ml burette and continuously rotate the flask, to ensure thorough mixing.

3. As the end-point nears, the silver nitrate solution should be added slowly and carefully to avoid adding excess of the reagent.

4. Note the titre and repeat the titration again if sufficient SAMPLE WATER is available.

5. Normal fluid usually requires between 7.0 and 7.6 ml of silver nitrate.

Reaction :
NaCl + AgNO3 = AgCl + NaNO3

From the above equation it can be seen that 58.5 g of sodium chloride are equivalent to 170 g of silver nitrate.

Therefore 58.5 mg NaCl ≡ 170 mg AgNO3

Now the standard solution of AgNO3 contains 2.906 g per litre or 2.906 mg per ml

Hence 2.906 mg or 1 ml of standard AgNO3 corresponds to
2.906 X  ( 58.5 / 170 mg of NaCl )
1 ml AgNO3 = 1 mg NaCl

If the titre was 7.3 ml of AgNO3 (or 7.3 ml × factor), then mg NaCl per 100 ml CSF =   titre X 1 X ( 100 / Amount Taken )
         7.3 X 1 X 100 = 730 mg per 100 ml

Notes—

(a) It is now desirable to express the NaCl value in terms of mmol per litre, in which case the following formula is used.

mmol per litre =  ( mg per 100 ml X 10 ) / molecular weight
                       = ( 730 X 10 ) / 58.5 = 124.8

(b) A solution of AgNO3 containing 5.812 g/litre can be used in which case 1 ml of AgNO3 = 2 mg NaCl.

Phenol liquid is an amino acid derivate which is used to protect plants from infections and pests and is made by the natural degradation of organic waste products. It is popularly known as Carbolic Acid Liquid and acts as an antimicrobial agent and is used in a variety of pesticides, insecticides, and herbicides.

Molecular Formulae- C6H5OH

Alternative Names- Hydroxybenzene, Phenic Acid

BENEFITS AND USES-

Phenol liquid is used in pesticides to ward off pests and pathogens from infecting the plants and to promote plant growth. 

It deters pests and small insects from eating the plants and destroying the yields. 

It helps in improving the productivity of crops by protecting them from microbes.

It is simple to administer during the planting season.

It does not get absorbed by the plants and is therefore safe for use on plants and crops.

It has a longer shelf life and is highly stable.

HOW IT WORKS-

It works by protecting the plants and crops from insects, microbes, pests, and weeds.

It works by forming a layer on top of the soil and releasing substances that kill pests. 

TIME OF APPLICATION-

It can be used during the dry summer or winter months.

It should be used at least once every three months to avoid a resurgence of pests and insects in the fields.

RECOMMENDED USAGE- 

For spraying, the recommended usage is 2% weight by volume. 

Use 5–10 kg/acre for solid application.

HOW TO USE-

Spray it directly onto the soil early in the morning or late in the evening.

Our phenol liquid should be added to a sprayer or mixing tank that is already filled with fresh water.

How to clean Pet Coke STAIN  - 

Coal and petcoke leaves stain,  its removal is important task during hold cleaning operation. Our expert has 2 suggestion for removal of such stain from the surface.  

1st one to use RX Tuff heavy-duty alkaline cleaner, which can apply as an emulsion, need time to take effect and are rinsed away with seawater. More than one application will be needed to remove stubborn stains. 

2nd one solution is much more effective than 1st one step. Here our expert suggests using New ORG on the spotted area where the residue is tightly deposited on the surface. " New ORG -RXSOL-20-2020-025 " this product is specialized to react with oily residue where any alkaline cleaner fails to emulsify. Uses of New ORG  chemicals for stain removal/cleaning principally dissolve and emulsify OIL RESIDUE stain completely which is resulting stain-free surface, Then without flushing with water follow 1st step.

Note 1 : Only 50 Ltr New ORG required to cover entire ship hold SPOT STAIN area. And it will not cost more than 100 US$, but its uses can save a full daytime. As pet coke contains oily residue. Only uses of alkaline cleaner doesn't emulsify oil properly.

Note 2 : New Org  50 Ltr is absolutely free alongwith order of RX Tuff, Aquatuff, Pet coke remover, If your order Qty is more then 1500 Ltr.

HEALTH HAZARD INFORMATION SHEET Peroxyacetic Acid (PAA)

Peroxyacetic acid (also known as peracetic acid or PAA) is an organic peroxide based, colorless liquid with a low pH and a strong, pungent, vinegar-like odor. In the concentrated form it is highly corrosive and unstable. PAA is formed from the reaction of acetic acid and hydrogen peroxide. Commercial PAA products contain all three chemicals in an aqueous solution often with stabilizers added. The concentration of PAA as the active ingredient, as well as the mixture of the other ingredients, can vary widely.

PAA is used in food and beverage industries as well as hospitals, health care and pharmaceutical facilities as an antimicrobial agent, surface cleaner and sanitizer. In many meat and poultry establishments it is used on carcasses, parts, trim and organs to reduce bacterial contamination and foot spoilage. It can be applied by a variety of methods including spray cabinet, dip tank, hand spray pump and chiller.

How are FSIS employees potentially exposed to PAA in their workplaces?

FSIS employees can potentially be exposed to PAA when it is used as an antimicrobial or acidifier in ways that fail to properly contain or ventilate the product. The following are some examples of how IPP could potentially be exposed if controls are not properly in place:

• Off-gassing from chillers;

• Over spray from spray cabinet openings and high nozzle pressure;

• Lack of local exhaust ventilation on spray cabinets;

• Inadequate ventilation in kill floor area;

• Direct discharge of waste solution from cabinets and tanks directly onto the floor;

• Failure to properly control solution pH;

• Chemical mixing in floor drains; and

• Hand application with spray tanks.

The latest version of FSIS Directive 7120.1, “Safe and Suitable Ingredients Used in the Production of Meat, Poultry, and Egg Products”, contains a list of PAA containing substances and the concentrations that may be used for specific purposes in meat, poultry and egg product establishments. PAA solutions are currently approved for use in PAA concentrations ranging from 50 to 2,000 parts per million (ppm).

ESHG-Health-03.00 FSIS Environmental, Safety and Health Group (ESHG) 1

What are the potential health effects of exposure to PAA?

Concentrated forms of PAA solution are corrosive and exposure can cause irreversible damage to skin and eyes. When PAA is used in establishments for antimicrobial applications, it is used in diluted concentrations (ranging from 50 to 2,000 ppm in solution). Exposure to PAA in the dilute form as a vapor or mist may sometimes cause eye, nose, throat and respiratory irritation that usually subsides when exposure ceases. Currently, there is no correlation between a specific concentration in solution and the resulting concentration in air or the level of irritation expected. IPP should be aware that, in general, pre-existing respiratory conditions may be aggravated by exposure to airborne irritants.

What OSHA Standards and exposure guidelines apply to PAA?

There are no specific OSHA standards for PAA. The American Conference of Governmental Hygienists (ACGIH) recommends a Threshold Limit Value (TLV) of 0.4 ppm, as a 15-minute Short Term Exposure Limit (STEL). ACGIH also does not consider PAA to be classifiable as a human carcinogen.

The ACGIH TLV is currently used in the meat and poultry industry as a general guideline for determining PAA health exposures. Therefore, when airborne concentrations of PAA exceed this value, action should be taken to limit exposure by leaving the work area until the reason for the elevated concentration can be identified and resolved.

The National Institute for Occupational Safety and Health (NIOSH) is in the process of determining the concentration of PAA that should be considered Immediately Dangerous to Life and Health (IDLH). This document will be updated with that value when it is published.

How are occupational exposures to PAA monitored or measured?

There are no validated OSHA or NIOSH air sampling methods for PAA. Both agencies are investigating and developing a reliable method. This document will be updated when more information if available.

ESHG-Health-03.00 FSIS Environmental, Safety and Health Group (ESHG) 2

There are also several portable, direct reading monitors which are commercially available for sampling PAA. However, these monitors are not specific for PAA but can react to many types of oxidizing chemicals (such as chlorine, ozone and hydrogen peroxide). The monitor sensors are also sensitive to water, humidity and temperature making them difficult to use reliably in many establishments where PAA is used. The FSIS Environmental, Safety and Health Group (ESHG) is currently evaluating these monitors for use in the field.

What safety precautions can be followed to protect FSIS employees against exposure to PAA?

The most effective ways to prevent over-exposure to PAA is to minimize the amount of vapor, mist or droplets that come into direct contact with employees by providing adequate containment, ventilation, and process controls.

Some potential controls that establishments can put in place to minimize exposure are :

• Spray cabinets can be enclosed enough so that significant amounts of mists or droplets are not released through the entrance or exit to the cabinet.
• Local exhaust ventilation can be used to remove mists directly from the

cabinets.
• Clear plastic or stainless steel shields can be used to deflect spray from

contacting inspectors.
• Spray cabinets can be installed as far as practical from inspection stations. • Closed drain lines can be used for wastewater discharges from the cabinets

to the floor drains.
• If there is an issue with chemical mixing in floor drains, a dedicated drain line in the floor troughs can be used to carry the wastewater to an area where discharge will not cause safety issues.

• Adequate general ventilation can be provided using properly designed exhaust fans and fresh air supply units.

• PAA solutions can be monitored and controlled for concentration, pH, and temperature to reduce off-gassing, as specified by the system supplier.

How can an IIC ensure compliance with the OSHA Hazard Communication Standard for this Chemical?

1. The IIC is responsible for ensuring that the requirements of FSIS Directive 4791.5, “Hazard Communication Program” are met.

This includes:

ESHG-Health-03.00 FSIS Environmental, Safety and Health Group (ESHG) 3

• Ensuring the List of Hazardous Chemicals used or stored on site is available in the USDA office as required by Directive 4791.5 Attachment 1 Section II. This list is usually limited to antimicrobials, sanitizers, and refrigerants.

• The Safety Data Sheet (SDS) library location is noted on the signature page of Directive 4791.5 Attachment 1.

• Ensuring hazardous chemical containers are appropriately labeled.

2. The IIC is to provide training to all FSIS employees (including relief inspectors) for all chemical hazards in the workplace. Training includes:

• Allowing IPP access to and time to read the SDS.

• The location of hazardous chemicals that IPP may be exposed under routine and emergency conditions.

• Monitoring systems (if any) used to detect the presence or release of a hazardous chemical in the work area.

• How IPP can identify the presence or release of a hazardous chemical (e.g. visual appearance or odor of chemicals).

• The location of the required list of chemicals.

• The location of the SDS library.

• Steps IPP can take to protect themselves from hazardous exposure.

• Emergency procedures found on FSIS form 4791-21.

4. The IIC can use information from the SDS and the chemical label for training material and any additional information provided by the chemical supplier and/or establishment regarding the working solutions and use concentrations to which IPP may be exposed in their work areas.

All occupational health and safety training is to be recorded using either AgLearn or FSIS form 3530-12. Training records are to include the topics covered, date, and employee name. The Agency is to retain all training records for a minimum of five years.

Free iron cannot be seen on the surfaces of contaminated parts. Therefore, it must be converted into a visible form.   
Ferroxyl Test Kit helps to Identify transition Iron metal ions to blue colour spot. 

The transition of Iron metals to form blue coloured compounds with TK F1 and TK F2. 

colourless solution → blue precipitate  ( Detail of Ferroxyl test kit procedure and specification are available on this link http://rxmarine.com/Ferroxyl-Test-Kit-for-free-IRON

We are one of popular Ferroxyl Test Kit seller and supplier in Mumbai, Visakhapatnam, Chennai, Kolkata, Gandhidham, Fujairah, Dubai, Sharjah, Abu Dhabi. Ferroxyl test kit are available on discounted price to our regular customer. Please share your requirement through this email id mail@rxmarine.com for India supply while you can use this email id mail@dubichem.com if your location is middle east.