RXSOL Teepol is Anionic in nature, which is resulting very good emulsification with most of oily and greasy contents. TEEPOL RXSOL multiple cleaning formula increasing its application field widely. TEEPOL RXSOL not only used in Household, industrial cleaning application but also commonly used in Laboratory, Pharamceutical, MARINE cleaning operation.
We are supplying teepol rxsol widely in INDIA - Middle East and Oman. And we are supplier of RXSOL TEEPOL in Navi Mumbai MIDC, Mumbai, Gandhidham, Mundra, Sikka Jamnagar, Surat, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Dubai, Abudhabi, Ajman, Sharjah Muscat Sohar Oman... http://rxmarine.com/Teepol-RXSOL-Supplier
MSDS of RXSOL TEEPOL and Price : mail@rxmarine.com
Also refer this link : http://rxmarine.com/Marinechemical-supplier
In-service cleaning RXSOL-16-1049-020( Air Cooler Cleaner ) is passing through the air trunking upstream of the charge air cooler, followed by a clean water rinse.For cleaning of air coolers, it is necessary to use correctly installed dosing and injection system.
Hand spray Cleaning:-
By Hand spray, apply concentrate RXSOL-16-1049-020 ( Air Cooler Cleaner ) all over the cooler coils. for good emulsification & penetration. Allow the RXSOL-16-1049-020 for a minimum of 1 hour, then use a high pressure water to wash off the loosened deposits. During process always keep drain valve open. After satisfactory cleaning, and flushing through with fresh water, close air cooler drains.Note that during this process the engine must be stopped.
Soak method :
Machine parts with stubborn carbon deposits to be cleaned is dipped into conc. Soln.of ACC then allow deposits too. Be broken down and loosened before removal, then rinse.
3 to 5 litres of cleaning solution per square meter or as table below:
Engine HP. Solution of 10 to 25% RXSOL-16-1049-020 ( Air Cooler Cleaner )
6,000 to 12,000 2 to 3 litre
12,000 to 24,000 4 to 5 litre
24,000 or more 6 litre
NOTE :
For cleaning of Air cooler and Air side of turbochargers, a solution of 5 - 25% RXSOL-16-0009-ACC in fresh water is recommended. Inject the solution for 10-15minutes, then similar quantity of fresh water injected to rinse off emulsifieddeposits.
Characteristics:
Formulated to remove oil, grease & carbon deposits from air coolers & scavenging system
Efficient and economical.
May be used for in-service cleaning.
Renders surfaces oil-repellent.
Maintains and stabilizes air cooler efficiency at a maximum.
Saves time, maintenance costs and avoids risks of damage when dismantling.
Leaves no residue and has no harmful effect on the engine.
Product in water solution is non-flammable, non-explosive and has no flash point.
Can be used for light carbon removal from machinery parts
**Read the Material Safety Data Sheet before using this product**
ACC9 is industrial equipment maintenance air cooler cleaner for cleaning of the diesel engine charge Air cooler. ACC9 is Light yellow to brown colored water-soluble solvent, which emulsifies with water. ACC9 is blend of the selected specified solvent mixture which is safe in contact with all metals.
ACC-9 Air Cooler Cleaner Principally works as follows, with triple action :
1st Action : Non Corrosive Solvent present in ACC9 helps to dissolve all deposits, oil, greasy materials. 2ndly : While emulsifier increases Detergency property to enhance cleaning action of ACC-9. 3rd Important feature of ACC-9 the presence of inhibitors in ACC9 protect soft metal, we can say INHIBITOR makes solution safe to contact with all metals.
answer